Tubular Manifold Heaters
Formed Tubular Heaters is supplied in Chrome Nickel Steel with nominal sheath diameter of 6.80mm, 8.00mm and 10.70mm. Standard elements have a threaded terminal post which gives a cold section of approx 40mm minimum.
The helical wound heating wire is made of a high temperature resistant NiCr alloy. And the insulation consists of superior grade of magnesium oxide (MgO). As the heaters are swadged, even at high sheath temperature they have excellent electrical insulation and a high heat transfer. To prevent the heater from moisture the connection ends are sealed with sealing components.
For manufacturing formed elements it is necessary to have a accurate dimensional sketch showing all the centre distances, radius and degrees, thus they need to be provided while placing the order
Tubular Heater - Applications
Tubular Heater - Features
- Available in Chrome Nickel Steel
- Sealed Edges to prevent from Moisture
- Superior Grade Magnesium Oxide Insulation
- Swaged for Good Electrical Insulation & Heat Transfer
- Available in Dia 8mm, 6.5mm & Square Section 6mm x 6mm.
Length Tolerances: ± 2%
Diameter Tolerance: ± 0.10mm
While placing the order for Tubular Heater please consider the following :
During designing the formed Tubular Heaters this fact should be stated in the order.
The minimum bending roller for ø 6.8 is 18mm, for ø 8mm is 24mm andfor ø 10.7mm is 32mm.